본문
Special Features
| Construction Method | Application | |||
|---|---|---|---|---|
| Single Storey (Terrace or Link Houses) |
Double(2) Storey (Terrace or Link Houses) |
Three(3) to Six(6) Storey (Apartments or Buildings) |
High Rise (Buildings or Apartments) |
|
| Traditional Bricks | The most common. Slow construction and labor intensive | Usually not acceptable without concrete beam | Structurally not suitable Requires concrete structural elements | Structurally not suitable |
| Concrete Frame(Columns, Beams & Slabs)with Brick or Block infill | Most commonly used where bricks/blocks alone are not acceptable. Slow method | Most commonly used method, slow & costly compared to system | Traditionally used method worldwide. Slow & costly. Remains the method of choice for small builders, but losing out on large-scale projects to new systems | |
| Precast / Prefabs Concrete | Suitable for large projects. High initial costs and slow start up for precast / prefab plant. Transport and lifting costs are inefficient compared to cast in-situ system | Careful supervision of construction is required. Noted for rampant instability of joints | ||
| Cast in-situ concrete:Heavy Shuttering system | Not suitable - requires too much labor & time to move equipment from one house to another | Suitability increases in proportion to height of building & number of units. Not suitable for less than 250 units. Resulting in efficiency loss | ||
| Kumkang Kind Aluminum Formwork System | Efficient & Cost effective than any of the above methods. Kumkang Kind Aluminum Formwork System is lightweight, hand-held shuttering, flexible, adaptable, faster & environmentally friendly | |||
| Characteristics | Formwork Type | ||||
|---|---|---|---|---|---|
| Hard Held Formwork |
Tunnel Formwork |
Table Formwork |
Traditional Formwork |
Kumkang Kind Al. Formwork |
|
| No cranes or other heavy equipment required | 해당 | 해당 | |||
| Allows to pour wall, slab, beam, column and staircase in 1 single concrete pour | 해당 | 해당 | |||
| Dismantle slab panels without removing props. | 해당 | ||||
| Can form concrete columns and beams together | 해당 | 해당 | 해당 | ||
| NO Skilled labor required | 해당 | 해당 | |||
| Suitable for single (1) or two (2) storey buildings | 해당 | 해당 | 해당 | 해당 | |
| Suitable for high-rise buildings | 해당 | 해당 | |||
| Formwork equipment adapts to different designs | 해당 | ||||
| Able to form all concrete elements | 해당 | 해당 | |||
| Lowest formwork to forming area ratio | 해당 | ||||
| Respects all architectural and structural requirements of the client, without modifications. | 해당 | 해당 | 해당 | ||
| Self correction feature providing unmatched forming accuracy | 해당 | 해당 | |||
| Environmentally friendly - no huge debris, no messy disposals | 해당 | ||||
| Specification | Aluminum A6061-T6 | ||
|---|---|---|---|
| Material | List | Unit | Combined Aluminum (A6061-T6) |
| Unit mass | kg/m² | 2700 | |
| Allowable bending stress | MPa | 125 | |
| Young's modulus | MPa | 7.0 x 10⁴ | |
| Composition | Inner wall panel | Slab corner & Beam | |
| Slab panel & prop | In-out corner & Hunch | ||
| Accessory | Flat-tie, PVC sleeve, round pin, wedge pin | ||
| Normal module | Wall panel | 600mm x Wall height (2,300 or 2,450) x 63.5 thk | |
| Slab panel | 600mm x 1,200 x 63.5 thk | ||
